DUST DETECTOR
Reveal the particles – Detection in UV
Detecting the finest dust, for effortless and impeccable cleanliness
As for grey rooms, in the watchmaking assembly process, the presence of dust on the dials, movements and case middles directly affects the quality and productivity of the casing workshops. Consequently, detecting and eliminating these particles is crucial to ensure that the watches are free from any contamination. Currently, this detection is mainly carried out via visual examination, which can be arduous and inefficient.
Our new detection tool facilitates this process, and reduces ocular effort. Thanks to use of UV LEDs designed specially for this application, even the finest particles can be revealed, thereby facilitating their elimination. This contributes to reducing aesthetic and water resistance problems associated with the presence of dust contamination.
In addition, our detector is equipped with an adjustable anti-UV filter to protect the operators' eyes from any optical reflections. All the necessary safety measures have been built into its design and development.
Its compact design and small footprint enable easy installation on workstations, thereby providing optimum ergonomics for watchmakers.
Weight :
Content :
Technical specifications:
· UV light (20 Watts, 365 nm, variable intensity)
· White light (10 Watts, 6500 K, variable intensity)
· UV protection glass filter, orientable
· Unit made from synthetic material
· 1 time delay, programmable from 5 to 20 s
· 1 time delay, programmable from 30 s to 2 mins
· AC110/120V
· Input: 12 VDC, 2A, 24 W
· CE certification
APPLICATIONS:
· DUST DETECTION BEFORE ASSEMBLY
· INSPECTION DURING WATCH CASING
· "EPOSINT" COATING PRESENCE CHECK ON SCREWS
· PHOTOLUMINESCENT OILS PRESENCE CHECK ON MOVEMENTS
Advantages :
➔ Eye protection
➔ High-power UV LED
➔ Easy to handle
➔ Programmable
➔ UVs switched off after time delay
Maintenance advice:
Clean the filter using an alcohol wipe
Recommendations :
Advice for use:
· To ensure optimum safety, always work with the device placed on the workbench. (A safety contactor is provided for this purpose)
· Program and select an inspection time delay (from 5 to 20 s).
· Program and select a suitable time delay for your decontamination time (from 30 s to 2 mins)
· Set the filter angle so as to protect yourself from UV reflections
· Set the UV intensity.
· Option of aesthetic inspections without UV, using white LED.
· We recommend using our orientable table to facilitate dust detection.
Safety advice:
· Never look at light sources without protection.
White light
Case middle observed under white light.
The dust is not visible, the case middle appears clean in this initial observation.
UV light
Case middle observed under UV light.
The dust is revealed on the case middle and crystal.
ACCESSOIRES:
