ANTI-SCRATCH BENT TWEEZERS
Hand fitting / Positioning flat
ANTI-SCRATCH BENT TWEEZERS ARE USEFUL FOR FITTING HANDS WHERE THERE IS A FLANGE FITTED, BUT ALSO FOR COUNTERS.
The technical specifications of the polymer used to make its interchangeable tweezer tips were designed exclusively for the watchmaking and jewellery fields. This material does not scratch precious materials. It has a sufficiently hard surface not to be worn, and become charged with particles.
The bent shape of these tweezers makes them ideal for fitting watch hands. Thanks to their geometry, you can hold them parallel to the dial when fitting hands. This really optimises your stability and precision during the operations.
In case of wear or breakage, its tips can be replaced easily using a screwdriver.
We can also design other custom shapes.
B162000-EBC (set of upp. + lwr.tips)
B162000-EBC-S (upp. tip)
B162000-EBC-I (lwr. tip)
Weight :
17 gr
Technical specifications :
• Anti-scratch polymer tips
• Interchangeable tips
RECOMMENDATIONS:
These high-end tweezers must be used with care.
The synthetic tips remain fragile, and can break if dropped for example.
The alignment of the two points can be corrected at any time since the tips have an angular play. You need only unscrew the four slotted screws slightly, make the adjustment, and retighten the screws. Make sure not to apply an excessive torque.
The tips can be cleaned by quickly giving them a quick wipe with an alcohol-soaked cloth.
REPLACING THE TIPS:
Use a watchmaker's screwdriver for the slotted screws, and a mechanic's screwdriver (type PB 5180/1-80 - Screwdriver Pozidriv PZ1/SL 80 mm) for the central Phillips head screw.
When refitting, start by screwing in the slotted screws, without over-tightening them.
Then proceed to the self-tapping central screw, which requires a higher torque and axial pressure during screwing.
Orient the points so that they are correctly aligned, and tighten the slotted screws last.
ACCESSORiES:
